Antique Steam Locomotive 12" Bell With Yoke

Nice condition Antique steam locomotive 12" bell with cast iron yoke. The bell measures 12" in diameter x 10" tall, the yoke measures 25" tall x 18" across and is maked 26421 & 4956.

Antique steam locomotive 16-1/2" bell with cast iron yoke. The bell measures 16-1/2" in diameter x 14" tall, the yoke measures 32" tall x 24-1/2" across overall.

Older steam locomotive bell with 2 concentric rings on the bottom edge. The cast Iron yoke has some casting marks that are hard to read. This bell does not have any shop stamps. Including the rolling

12" bell diameter. The cast yoke 19-1/2" tall. Lehigh Valley Steam Locomotive Bell. Pat. Pending

A large steam locomotive bell. It has a 17" diameter and the actual bell is 12" high. The cast iron yoke has 2 casting marks: base has 65697 (note "5" is upside down), top has 24139. I did find any sh

A large and heavy steam locomotive bell. It has a 17" diameter and it measures 12" high with a total height of 14" to the top of the mounting fitting. The cast iron yoke measures 17" bottom to top whe

Steam Locomotive bell with cast iron yoke. Bell measures 14" high and base diameter of 16". Wonderful tone when rung. These bells ae always made of an alloy specific to bells, designed to provide that

DESCRIPTION: Large Howard steam locomotive bell. Brass bell with cast iron yoke and crank. Embossed with "Howard" to top and bottom of yoke. Howard produced bells for steam engines form 1840 onward. F

A very heavy steam locomotive bell with an 11 1/2" diameter and 9" height to the base casting. Overall with yoke it is 21" tall. Mounted on a rolling base. No casting marks or shop stamped numbers on

A 16" cast bronze steam locomotive bell mounted in a very heavy cast iron yoke with a hex nut finial. There appears to be provisions for an air ringer on the lever side. Clapper is intact. Bell shows

Cast Brass Steam Locomotive Bell. Circa 1890. Along with a cast iron Yoke mount. Bearing illegible numbers. Along with the number 6678 on the bell.. Condition- Rust on Yoke Verdegris finish on bell. 1

14 1/2" Diameter Brass steam locomotive bell. The bell is polished brass with a repainted red interior. Equipped with a Trans Devices ringer. The bell itself is otherwise unmarked. The yolk has 12 V S

A heavy little bel with 12" diameter. It also stands 9" on the bell height. With the yoke it measures 25" tall. It mounts flat (not a curved boiler). It is probably from a gas car or electric locomoti

12" bell diameter. The case yoke is 20" tall with acorn finial.

A flat mount bell that measures 9" high by 12" diameter. Bells in general are not brass or bronze but a "bell" metal that is a mixture of metals. The total height with yoke is 22". One side arm has a

Look past the paint! The yoke has HOWARD cast twice: once up top and larger on the base. The bell measures 9" high by 12" diameter. The total height with yoke is 19". It has both a pull arm and a air

A very heavy steam locomotive bell with (15" diameter and 12" base to top dimensions. Mounted on a rolling base. Air ringer is untested. Loads of shop stamped numbers on top, please see the pics. You

Unmarked, graham white double acting clapper. 18"h x 12"round

The brass or bronze bell with red interior and measuring 12 7/8 inches at the widest point is suspended in an iron yoke and cradle on circular base with iron crank and acorn finial at the top, unmarke

12" diameter x 18.5" tall with cast yoke and acorn finial

12" diameter x 18.5" tall in triangular yoke

Train steam generated bronze bell. Marked "Graham White" on the clapper. Marked "8004156" on the crown 12 " diameter. 16" height including bracket.

Illinois Central Railroad Steam Locomotive Bell - Possibly from a 2-8-2 Illinois Central Railroad Steam Locomotive Bell. The bell has ICRR M-C cast into the top of the bell along with 04074. The numbe

10" Diameter Brass Steam Locomotive Bell Bell measures 10" in diameter with an acorn top nut. The yolk has been repainted and appears to have MD 227 cast in near the bottom. The bottom plate is curved