ERNST PLANCK Noris, hot air motor, sheet metal and cast

hot air motor, lying, 2 cylinders, Schulze, SCH1, probably around 1995, casting / sheet metal, with burner, 28 x 50cm, height: 27 cm, function wasn't checked, only for collection by the customer Germa

ERNST PLANK hot air motor, c. 1920, surface area, 27 x 14.5 cm, flywheel, diameter: 9 cm, with burner, funnel was supplemented, was colorwise retouched German Description ERNST PLANK Heißluftmoto

279. ERNST PLANK NORIS HOT AIR ENGINE | 11" l. | All Original Condition. | $300 - $600

engine room, filigree hot air motor, case made of wood, metal tools, transmission, plastic figures, surface area 34 x 19 cm, height: 20.5 cm, decorative German Description Maschinenhalle, filigraner H

HUBERTUS RAAB hot air motor, c. 1880, (RAAB / TRIUMPH Motor), heavy metal construction mounted on a wooden board, surface area, 29 x 29 cm, flywheel, diameter: 14.5 cm, with burner, please note the&nb

REICHELT hot air motor, new produced based on old model, heavy cast model mounted on wooden board, surface area: 28.5 x 18 cm, height: 34 cm, with burner, small transmission, with dynamo and lamp, ple

Very nice early wooden sled. Has cast metal swan heads on ends of rails. Seat has graphics of Hot Air Balloon and Bird in Tree painted on it. All original with great colors. 30" Excellent

Detroit Stove Works Jewel 2652 gravity hot air furnace salesman's sample with case. We are estimating that it is early 20th century. It is in cast metal (does not attract a magnet). The case in black

white metal die cast, salmon & gray, 1 missing hood ornament, orig box worn, C8.

A one-of-a-kind prototype with unusual four wheel fixed frame, c. 1918 – 1920, red & black frame with hand lettered “B&O” and “C-1350” graphics; painted sheet metal body, cast iron sprung ax

Ettore Sottsass, 'Treetops' floor lamp, 1981, H. 196 cm. Made by Memphis, Milan. Sheet metal, tubular metal, cast metal, painted., Exh. cat. Lumières, CGP, Paris 1985, p. 143.

Ettore Sottsass, Two 'Harlow' chairs, 1971, H. 81 x 48 x 62 cm. Made by Poltronova, Pistoia. Cast aluminum, sheet metal, chrome-plated, white-grayish fur cover. Marked: manufacturer's stamp with desig

The over-sized model of a man's pocket watch with box hinge case is comprised of domed zinc sheet metal discs in a cast iron frame, the hand painted dial having black Arabic numeral chapter ring and p

Mixed lot 4 Tetsubin Japan, Meiji period, around 1900 Cast iron and sheet metal. Partly with flora decoration. H. 23, 21,5, 19,5, 14,5 cm. Signs of age and use.

Serge Mouille, 'Trépied' table light, 1954, H. 45 x 30 x 12.5 cm. Made by Steph Simon, Paris. Tubular metal, cast brass, painted black, sheet aluminum, black, painted white on the inside., Pral

Ives Prewar #1132R President Washington cast iron loco and sheet metal tender in olive green. With the #1132R loco in surprising good C6 plus to C7 minus condition and the tender in C5 because of pain

Jean Tinguely, Metamechanic sculpture, c. 1961, Jean Tinguely (French, 1925-1991), "Ma Prima", sheet metal, metal pan, wheel, electrical motor, paper information label on verso, 34"h x 16"w Provenance

Mario Botta, 'Shogun Terra' floor lamp, 1986, H. 203 cm. Made by Artemide, Milan. Cast metal, blackened, tubular metal, sheet metal, painted black and white. Marked: Manufacturer and designer's inform

ERNST PLANK Laterna Magica, Chinese Pagode, 1878, in original wooden box without cover, without burner and lens, height: 25 cm, decorative lithographed sheet metal, the scratches on the paintwork are

rated 8.5, 19.5"x12.25", the metal flange sign has very good color and shine, has light wear and a few fine scratches, marked St. Louis Tin & Sheet Metal. This is the nicest example that I have seen.

DSTF. Very good gloss and color. It shows some scratching and paint loss. Marked St. Louis Tin & sheet metal working company. Very tough sign to find in this condition. Measures: 19.5"X12" Rating: 8.5

David Kracov (Switzerland b. 1968), "Love is in the Air #2," 3d metal and mixed media sculpture, depicting a horizontal composition of hot air balloons, signed to lower right, titled and numbered 16/5

The air meter is in as found condition, has rust holes in sheet metal, 46"T., rated 7

Jean Tinguely, Metamechanic sculpture, c.1961, Jean Tinguely (French, 1925-1991), "Gift for Ileana", sheet metal, mechanical musical monkey, beer can, wax paper label, motor, Andre Chenue paper shippi