Early 1947 Eames/Herman Miller DCW Birch Chair.

Model "LCW" lounge chair in molded birch plywood, designed by Herman Miller for Eames in 1946. This example is a rare early production, manufactured by Evans Products between 1947-1950. Labeled undern

Eames Design for Herman Miller, DCW Dining Chair, molded ash plywood, rubber, 28.75 x 19.5 x 23 inches (73 x 49.5 x 58 cm), 5-2-4 screw pattern on base (see photo), unmarked.

Exceptional and rare set of (6) bent plywood DCW chairs in ebonized finish, designed by Charles & Ray Eames for Herman Miller and produced by Evans Products, c. 1947-1950. Five of the six chairs with

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller DCW chair Zeeland, Michigan, 1950s molded birch plywood, chromed steel, rubber foil label 19 1/2"w x 18"d x 29"h

Herman Miller Mid Century Modern Early Eames DCW Lounge / Dining Chair Birch Molded Plywood for Herman Miller Evans Products Lounge Chair Circa 1940's 28.5" H 19.5" W 21" L Condition Consistent with A

Charles Eames (1907–1978) & Ray Eames (1912–1988) for Herman Miller DCW dining chair, four Zeeland, Michigan, 1950s birch plywood, ebonized plywood, rubber 19 1/2"w x 21"d x 29"h

Charles Eames (American, 1907-1978) and Ray Eames (American, 1912-1988) for Herman Miller, United States. DCW chair, designed 1945. Molded plywood and rubber, decorated with painting reminiscent of in

Set of (6) iconic Herman Miller for Eames DCW side chairs in molded plywood with Santos Palisander finish, from Design Within Reach c. 2013. Eames and DWR labels underneath. Dimensions: H 28.75" x W 1

Set of six authentic molsws plywood chairs in three different colors. All manufactured by Herman Miller. Chairs were purchased between 2007-2010 and have original paperwork. Chairs retail for $1100 ea

Early production Herman Miller Charles and Ray Eames DCW (Dining Chair Wood) in patinated honey colored ash. Very nice vintage example 28.5" H x 19" W x 17" D Seat height 17"

Very nice example of an early production Herman Miller Charles and Ray Eames DCW in a patinated honey colored ash 28.5" H x 19" W x 17" D Seat height 17"

Rare Early Original Cream Colour 1950s Eames Herman Miller Shell Rocking Chair. Dated November 27, 1957 on underside of chair. Original chair made for pregnant employees of the factory. This chair was

Early LCW chair designed by Charles and Ray Eames in 1946 for Herman Miller. Dimensions: H 27" x W 22" x D 22.5" x SH 15.25" Condition: In need of some restoratinon, with signs of wear including nicks

Charles and Ray Eames molded plywood lounge chairs made by Herman Miller. Original red aniline dyed seat and back. Early production with foil label. Some scuffs and wear throughout, one chair has repa

Early production DCM oak bent plywood side chair with factory black metal frame. Designed by Charles and Ray Eames. Manufactured by Herman Miller. Circa 1950. Dimensions: H 29" x W 19.5" x D 20.5" x S

Early production. Eames for Herman Miller molded fiberglass chair. No apparent labels. Dimensions: H 31" x W 18.5" x D 21" x SH 18" Condition: Fiberglass with signs of age and use including scratches,

Pair of Charles Eamer for Herman Miller "DCW" chairs, 1947 paper label. [29 1/4 x 19 1/4 x 21 inches; 17 1/2 inches to seat]. Some wear to both; one with seat rest repair and missing a foot button.

Early Charles Eames Herman Miller Rope Shell Chair. Rope edge shell chair -- Dimensions: H: 29 inches: W: 25 inches: D: 22 inches ---

Early Charles Eames for Herman Miller Rope Shell Chair. Rope edge shell chair with Eiffel tower base.-- Dimensions: H: 30 inches: W: 24.5 inches: D: 22 inches ---

Early Charles Eames for Herman Miller Zenith Plastics Rope Shell Chair. Rope edge shell chair with black legs.-- Dimensions: H: 31 inches: W: 25 inches: D: 23 inches ---

Pair Mid-Century Modern Early Eames Herman Miller DKX-1 X Base Shell Chairs. A handsome pair of dining side or desk chairs, with black tubular legs and black wire top, upholstered in black naugahyde t

Description - An early Charles Eames for Herman Miller DCW chair with rare slunkskin seat cover. Herman Miller label on seat bottom and Murphy Chair Co., Owensburg, Kentucky label. 1st Generation. Dim

Rare early Eames Herman Miller fiberglass shell desk chair with swivel, rolling and tilt base model DAT-1 in tan brown. Made during 1953-57. Measures 34" x 24 1/2" x 23" total with a 16 1/2" to 20" se

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller early DCW Zeeland, Michigan, 1950s molded rosewood plywood, chromed steel Evans / Herman Miller label 19"w x 16"d x 29"h