Charles & Ray Eames Herman Miller LTR tables pair

Pair of LTR side tables, Zeeland, MI, 1960s; Zinc-plated steel, walnut, laminate; Unmarked; 10" x 15 1/2" x 13"

Occasional tables (LTR's), pair. Herman Miller, USA, 1970. Laminate over plywood, enameled steel. Manufactures label to underside. 15 1/2w x 13d x 16 1/2h

Charles and Ray Eames (1907-1978 | 1912-1988) Pair of LTR Side Tables, c. 2000Herman Miller, USA laminate over plywood, enameled zinc with manufacturer's label H 10 x W 15 1/4 x D 13 inches

Charles and Ray Eames for Herman Miller 'LTR' Side Table, Zeeland, Michigan, c. 1950, plywood, steel, unmarked, ht. 10, wd. 15 1/2, dp. 13 1/4 in. For further information on this lot please visit Bonh

Description - A pair of Charles and Ray Eames for Herman Miller rolling side tables. Dimensions - 26" x 20" x 20"

Description - Pair of Charles and Ray Eames for Herman Miller Aluminum group marble side table. Dimensions - 17.5" x 30"

Charles and Ray Eames La Fonda occasional tables, pair Herman Miller USA, 1964 slate, cast aluminum, plastic 30 dia x 17.5 h inches Signed with decal manufacturer's label to underside of each example:

2 CHARLES EAMES FOR HERMAN MILLER LTR STOOLS: Mid-century modern, circa 1950, pair of Charles Eames for Herman Miller LTR occasional tables or stools with wire bases. Both with labels at the underside

2 CHARLES EAMES FOR HERMAN MILLER LTR STOOLS: Mid-century modern, circa 1950, pair of Charles Eames for Herman Miller LTR occasional tables or stools with wire bases. Both with labels at the underside

Charles & Ray Eames LTR low side table, Herman Miller Designed 1950, produced circa 1970-1984 Zinc-plated rods, white laminate, birch 10" x 15 1/2" x 13 1/4"   Herma

Aluminum Group tables, pair. Herman Miller. 1970's. Cast aluminum, enameled steel, rubber, laminate, plastic. 20w x 20d x 24 1/5h

Pair Charles & Ray Eames Rolling Side Tables. Herman Miller Aluminum Group side tables-- Dimensions: H: 26 inches: W: 20 inches: D: 20 inches ---

Charles and Ray Eames (American, 1907-1978 | American, 1912- 1988)  LTR table, by Herman Miller white laminated solid birch top over a zinc base unmarked H 10 x W 15 1/2 x D 13 1/4 inches. Proper

Charles & Ray Eames for Herman Miller Pair of Aluminum Group rolling end tables Design circa 1958, production circa 1989 Aluminum, oak veneers Each 29 1/2" x 30" x 24" Tagged to th

Charles & Ray Eames for Herman Miller Pair of Aluminum Group rolling end tables Design circa 1958, production circa 1989 Aluminum, oak veneers Each 29 1/2" x 30" x 24" Tagged to th

Three Charles and Ray Eames Laminated Wood and Steel LTR Tables Two with labels for Herman Miller Each rectangular top on wirework base. Height 10 inches, length 15 1/4 inches, depth 13 1/4 inches; To

PAIR 1970's EAMES HERMAN MILLER OCCASIONAL LRT TABLES, CHROME BASES, HERMAN MILLER LABEL, DESIGNED BY CHARLES AND RAY EAMES, EXCELLENT VINTAGE CONDITION

TWO CHARLES AND RAY EAMES "LTR" VENEERED PLYWOOD AND WELDED WIRE ROD TABLES, DESIGNED 1950, FOR HERMAN MILLER, ZEELAND, MICHIGAN, PRODUCED CIRCA 1950-1960, one with walnut veneered plywood top and bla

Description - Set of three Charles Eames Herman Miller LTR tables. Dimensions - 10" x 15.5" x 13"

(lot of 4) Herman Miller LTR tables, design by Charles Eames for Herman Miller, all with white laminate tops rising on rod or wire supports, two with misapplied Herman Miller tags reading "design by G

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d