Charles & Ray Eames Herman Miller DTM-2 table

Molded plywood in a black finish on tubular chrome steel bases, including the DTM-2 folding card table, and a set of (3) side chairs. Unmarked. Surface wear including some areas of loss to the veneer,

Charles & Ray Eames Folding table, model no. DTM-2, 1950s Plastic laminate, wood, tubular steel. Manufactured by Herman Miller, USA. 28.5" H x 34" W x 34" D

Charles and Ray Eames DTM-2 Herman MillerUSA, 1947walnut plywood, chrome-plated steel33.75 w × 33.75 d × 29 h in (86 × 86 × 74 cm) Signed with impressed manufacturer

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller, DTM-20 table and DKX-1 chairs, 4, USA, 1950s, enameled steel, birch, white laminate, wool upholstery, chairs with Gardena, CA label

Designed by Charles and Ray Eames for Herman Miller. Laminate birch plywood and steel. Card or dining table in square with white laminate over folding chromed steel legs. Round Herman Miller label on

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller DTM-20 dining table Zeeland, Michigan, 1950s white laminate, plywood, chrome-plated steel, painted wood stamped 'DTM-20' 34"sq x 28

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller rare checkerboard DTM-20 table Zeeland, Michigan, 1940s laminate, plywood, chrome-plated steel unmarked 34"sq x 29"h

Dining set, Zeeland, MI, ca. 1960; Zinc-plated and enameled steel, polished aluminum, plastic reinforced fiberglass, rubber; Remnants of labels to all; Table: 25 1/2" x 36" dia., chairs: 28" x 19" x 2

Charles and Ray Eames (American, 1907-1978 | 1912-1988) Herman Miller, c. 1947 DTM-20 folding game table laminate, plywood, enameled steel stamped DMT20 to underside Height 29 x width 34 x depth 34 in

CHARLES & RAY EAMES (20TH C.) FOR HERMAN MILLER DINING TABLE, H 29", L 54", DTM-1:Having a rectangular plywood top covered in white laminate, on four folding chrome-plated legs. Original label: Design

Charles and Ray Eames, manufactured by Herman Miller, dated July 1971; bank of four vinyl upholstered seats attached to aluminum trestle base, with attached white top end table, 32 1/2 in. H., 129 in.

Charles & Ray Eames for Herman Miller 3679 La Fonda occasional table Design 1961, production circa 1989 Perlato marble and cast aluminum 17 1/2" x 30" Tagged to the underside with Herman Mille

Charles & Ray Eames for Herman Miller 3679 La Fonda occasional table Design 1961, production circa 1989 Perlato marble and cast aluminum 17 1/2" x 30" Tagged to the underside with Herman Mille

Folding IT-1 incidental table by Charles and Ray Eames for Herman Miller, 1950s. 17" H x 21 1/2" W x 18" D.

Charles & Ray Eames 'DTM' folding table, 1950s Plastic laminate, wood, tubular steel. Manufactured by Herman Miller, USA. Underside with manufacturer's foil label. 28.75" H x 54" W x 34" D

Together with a modern maple stool, a chrome and white mesh stool, and a white-lacquer and chrome table. 4 pieces From: 10"h x 13-1/2"w x 15-1/2"d to 29"h x 24-1/2"d

Together with a modern maple stool, a chrome and white mesh stool, and a white-lacquer and chrome table. 4 pieces From: 10"h x 13-1/2"w x 15-1/2"d to 29"h x 24-1/2"d

Pair of LTR side tables, Zeeland, MI, 1960s; Zinc-plated steel, walnut, laminate; Unmarked; 10" x 15 1/2" x 13"

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d

White lacquer top and white metal base, manufacturer's foil label on bottom. 10"h x 15-1/2"w x 13-1/4"d

Charles & Ray Eames for Herman Miller Pair of Aluminum Group rolling end tables Design circa 1958, production circa 1989 Aluminum, oak veneers Each 29 1/2" x 30" x 24" Tagged to th