Charles and Ray Eames Dining Chairs

Charles & Ray Eames Dining chairs (4) Designed 1946 Model no. DCM Herman Miller Three retain remnants of manufacturer's label Each: 29" x 22" x 19" Literature: Eames Design: The Work of the Office of

Description - Seven Charles & Ray Eames for Herman Miller, DCM dining chairs. Dimensions - 30" x 19.5" x 20"

Charles and Ray Eames Herman Miller Set of Six dining chairs (DCM) USA 1980s Ash plywood & chromed steel Unmarked. Dimensions: H 30" x W 19.5" x D 20"Condition: A few professional re-glued mounts. Som

A set of six DKR chairs by Charles and Ray Eames for Herman Miller with leatherette and fabric upholstery. 32.5 x 18.5 x 16.5. Measurements are in inches. (Height x Width x Depth)

Charles & Ray Eames DCW (Dining Chair on Wood), laminated plywood, circa 1940s, with accompanying book that features this chair design 27"h x 22"w x 23"d

Lot 111 Charles and Ray Eames American (20th Century) DCM Dining Chairs, Group of 4 for Herman Miller plywood dining chairs with walnut veneer and chrome base each: 29 x 19 x 19 inches seat height: 18

Description - A set of eight Charles and Ray Eames DSM dining chairs, produced by Summit Plastics. Dimensions - 31" x 19" x 21"

Early production Herman Miller Charles and Ray Eames DCW (Dining Chair Wood) in patinated honey colored ash. Very nice vintage example 28.5" H x 19" W x 17" D Seat height 17"

Early production Herman Miller Charles and Ray Eames DCW (Dining Chair Wood) in patinated honey colored ash. Very nice vintage example 28.5" H x 19" W x 17" D Seat height 17"

Charles and Ray Eames side / dining chair in walnut 29" H x 20" D x 19" W.

Dining chairs, DSX-1, set of 12. Herman Miller, 1957. Molded fiberglass, zinc, rubber. 19w x 21 3/4d x 31 1/2h

Charles & Ray Eames2 fiberglass dining room chairs with orange cushion and standing on white lacquered metal leg ending in star foot, design Charles & Ray Eames for Herman Miller, model La Fonda, 1 st

An original, early, molded DCW Maple wood side chair, by Charles Eames, circa the 1940s. In excellent vintage condition, with the original Evans Products Company manufacturing tag still in tact and at

molded walnut plywood, chromed metal; unsigned 29 1/2 x 19 1/2 x 22 1/2 in. (74.9 x 49.5 x 57.2 cm.), seat height: 18 in. (45.7 cm.) Provenance: Property from the Collection of William Krisel, AIA

Charles & Ray Eames for Herman Miller, DCM (dining chairs), two, USA, 1960s, walnut, chromed steel, nylon, each stamped DCM with partial label, some shock mounts are detached and need replacing, 19.5"

Charles and Ray Eames, Herman Miller Molded Dining Chair with Chrome Base. Walnut stain finish.

Charles and Ray Eames, Herman Miller Molded Dining Chair with Chrome Base. Walnut stain finish.

Charles & Ray Eames 'Aluminum Group' dining table and four chairs, ca. 1977 Table: maple, cast aluminum, enameled steel, rubber, plastic; chairs: cast aluminum, vinyl. Manufactured by Herman Miller, U

Charles and Ray Eames (1907-1978 and 1912-1988)Three DCM dining chairs, early 21st centuryDesigned 1946Each with sticker to underside: Herman Miller / EamesEach with a veneered molded plywood seat and

Charles Eames (1907–1978) & Ray Eames (1912–1988) for Herman Miller DKR-1 dining chairs, set of four Zeeland, Michigan, 1950s enameled metal screw-on glides 18 1/2"w x 21"d x 33"h

Charles and Ray Eames (American, 1907-1978; 1912-1988) for Herman Miller pair of DCW ebonized molded wood dining chairs, designed in 1946, maker's label underside. 28.5" H x 19.5" W x 21" D; seated: 1

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

Four early DKX dining chairs by Charles and Ray Eames for Herman Miller in Kelly Green covers. 32 x 19 x 20 . Measurements are in inches. (Height x Width x Depth)