ATWATER KENT RECIEVING SET

No. 7570. 6 x 20 x 7 inches.

A grouping of (2) Atwater Kent sets. The smaller is a model 20. It has all tubes present but is missing one of the front panel knobs. The larger set is a model 32. This is a sophisticated 7 tube set w

Atwater Kent receiving set Model 30 radio, Serial No. 579743, 6 ½ inches high x 20 inches wide, and a metal horn speaker Model "H", 22 inches high.

Atwater Kent Receiving set Radio.Model 21 compact.

Model 20 Atwater Kent receiving set with five tubes inside; Schematic drawings included; Wooden case and power cord; No damage observed; Case measures approximately H 6 x W 19 1/2 x D 5 1/4 inches; Wo

Atwater Kent Radio - Receiving Set. Serial #482793. Has Tubes. Measures approx. 6.5" tall x 20" wide. Please read the terms and conditions. This sale will be broadcast live on sale day with full descr

Atwater Kent Model 10 Receiving Set, 1924 Breadboard model, 3 circuits, MW, 3 type-F variable condensers, type-TA amplifier with 3 tubes, battery-operated, for external speaker, width 29 in., very goo

Radio contains three tubes. Speaker has been tested using a modern audio amplifier connected to an 8 ohm to 600 ohm matching transformer; it works and plays music; producing reasonably good tone for a

Wood flip top case. 20x6"

This is an exceptionally clean example of this classic radio. Dimensions: H 6" x W 20" x D 6.5" Condition: Untested; sold as-is. All 5 tubes are present; unit seems complete - even the cloth cable loo

Grouping of (3) of these very popular early radios. One of the three appears to be complete, with all tubes and coils present - one has the coils but is absent (1) tube, and the third set is absent al

Untested. Approx. 17"w x 5" tall

1928 AC-powered metal case radio set made by Atwater Kent Radio of Philadelphia, PA, Model 42, s/n 2201460, with a Model E Speaker, s/n 953402. Tuned Radio Frequency (TRF) radio using a grid lead dete

A nice, clean battery set. Radio measures 6.5 x 21 x 7 inches with a speaker measuring 18 x 15.5 x 5 inches. We happily provide seamless in-house packing and shipping services on nearly everything we

Very nice set.

A rare early radio 5-tube set; tubes are absent. Included speaker is an Atwater Kent type M loudspeaker with a large, heavy steel horn. Speaker has been tested using a modern audio amplifier connected

Atwater Kent Bread Board Radio Model AK12 TA, 34" Long 7.25" Tall

DESCRIPTION: 1923 Atwater Kent Model 10A breadboard radio. MEASUREMENTS: 31" wide. CONDITION: Light overall wear as expected with age and use.

Atwater Kent "Breadboard" Radio Receiver, 1922 Type 3, American 2-valve detector receiver (2 x UV-200), MW, battery, for loudspeaker, width 18 ½ in. Very good condition, original mounting. Radi

The 10C was introduced in the mid 1920s, it employed two stages of RF amplification and was the first successful AK radio employing condenser tuning. In overall very good condition, all tubes and knob

DESCRIPTION: 1924 Atwater Kent Model 10A receiver. MEASUREMENTS: 31-1/2" wide x 10" deep x 7-1/2" high. CONDITION: Light overall wear as expected with age and use.

Type TA. 2 tubes.

DESCRIPTION: Atwater Kent breadboard. Similar to Model 3945 with variometer and table mounted condenser added. MEASUREMENTS: 26-1/2" wide x 8" deep x 7-1/2" high. CONDITION: Light overall wear as expe

Radio in very nice condition. Knobs and tubes present.