Doll No. 511 Overtype Steam Engine.

Twin cylinder overtype; smallest in the model 502 series of three; cast iron firebox with 3 vents. Original brick type stack. Fairly elaborate with ladders and platforms, twin flywheels, etc. Conditio

circa 1935, features Bing firebox, Fleischmann raised piston assembly, and 9" stack. Base 10" x 9" x 7".

One is marked Doll Company Made in Germany. Steam engine has red brick original stack. Looks to be moderate to heavy use. Larger lineshaft has weighted lever-operated clutch but with little paint on b

Steam toys (3), Doll Mill-Water Wheel #703, c.1930, appears to be orig, needs cleaning, water wheel slightly bent, no duck, VG cond, Weeden Steam Engine Overtype 21, appears to be orig, missing weight

Working Model of a Stationary Single-Cylinder Overtype Steam Engine, c. 1960 Extremely detailed engineering model, brass, steel and cast iron, gas-fired, brass boiler, 7/8 in. cylinder, attached chimn

DOLL steam engine, Ref. 407/3 (1925-1927), lying boiler, surface area: 41x25.5 cm, with burner, funnel, pipe, manometer, feed pump, dynamo, lamp, lampshade is missing, base plate was colorwise retouch

Includes original wooden box marked 1 only 4F steam engine, with label on one end. Original box is missing top sliding piece. Engine itself is horizontal with original red stack. Condition: (Excellent

DOLL steam engine drive model, sawmill with water wheel and water tower, surface area: 33.5 x 29 cm, sheet metal, handpainted, around 1900, the scratches on the paintwork are caused of old age , used,

DOLL steam engine, lying boiler, surface area was colorwise retouched, 37 x 42 cm, polished boiler, with a diameter of 8 cm, manometer, whistle, water level glass, with original burner German Descript

DOLL steam engine drive model, sheet metal, sleigh-ride, height: 15.5 cm, width: 22 cm, c. 1925 German Description DOLL Dampfmaschinen-Antriebsmodell, Blech, Schlittenfahrt, H: 15,5 cm, B: 22 cm, ca.

Nice original condition but needs cleaning; burner missing. Condition: (Very Good - Excellent). Dimensions: 12" x 5" x 12 - 3/4".

Bertoia BASICS Online: J F JOS FALK OVERTYPE STEAM ENGINE circa 1925 Base 10" x 5" x 14" h.

Steam toys (3), Doll Steam Engine, electric, minor paint loss, stack may be a replacement, missing whistle handle & weight for safety valve, added ceramic & Bakelite power switch, VG cond, Doll/Falk (

253. DOLL STEAM ENGINE PLANT | | 11" x 9" x 13"

DOLL steam engine drive model, water mill with hammer mechanism, sheet metal, handpainted, surface area 19x19 cm, worn with small paint defects, otherwise good German Description DOLL Dampfmaschinen-A

DOLL steam engine, standing, sheet metal with burner, oscillated topper, stucks, flywheel damaged, function wasn't checked, surface area 10 x 10 cm, height: 30 cm, please have a look at it German Desc

Bertoia BASICS Online: ERNEST PLANK OVERTYPE STEAM ENGINE circa 1930 Base 6" x 3 1/2" x 8" h.

Steam toys (5), Doll Steam Engine w/replaced heating element, missing governor & repaired sight glass, Doll Fountain, Doll Sawmill & Waterwheel #781, Doll Grinding Wheel, minor paint loss, Doll Man at

Impressive working model of a double cylinder overtype steam engine, mounted on a checkerboard decorated base, with two ladders that give access to open catwalk, a fully functional governor, pressure

Weeden Eureka No. 32 model overtype steam engine star ventilating cutouts in the boiler jacket, include a site glass, safety valve and old stage whistle, not tested. 15 x 7 3/4 x 4 1/2''

Doll, Steam Engine, Germany pw, tin, min. paint d., C 2

Doll, Steam Engine, Germany pw, tin, paint d., C 3

Doll, steam engine, Germany pw, 24x12 cm, paint d., burner not original, dents on kettle

Doll, steam engine, Germany pw, 20x10,5 cm, severe paint d.