Two Mahogany Tilt-Top Candle Tables

Ca. 19thC. These two mahogany tilt-top candle tables are in very good ready to use condition, perhaps needing only cleaning and polish.

Two tables including: 1) an antique cherry-wood tilt-top table [28 1/2 x 23 x 15 1/2; 41 inches high, tilted] and 2) a mahogany candle stand [25 x 15 (dia) (base) inches; 11 x 11 (top) inches].

Two mahogany tilt-top tables. [40 (closed) x 24 (dia) (top) inches; 38 (closed) x 24 (dia) inches]. Scratches; one with a long scratch.

This Federal Mahogany tilt top candle table has splayed legs on ball feet and is in original finish. It measures 29" tall with table down and 37.5" tall with the top tilted up, 19" across x 16" deep.

Vintage Mahogany Tilt Top Candle Stand Table with Inlay Banding. Measures 28 x 22 x 15 inches.

American or English, group of two mahogany tilt-top pedestal tables in the George III taste, comprising: a foliate carved supper table and a tea table with piecrust edge, all with birdcages, and risin

Mahogany Tilt Top Table Candle Stand Diamond Medallion “Spider Legs” Thinly turned urn Shaped Pedestal base. Some minor losses to banding on edge. Wear throughout consistent for its age. 29 1/

18th C. 28-1/4"h x 19-1/2"dia. and 27-1/4"h x 20-1/4"dia.

19th Century Nantucket Made Inlaid Mahogany Tilt Top Table, two board top, line and compass rose inlay, carved leaf urn standard, ball and talon grip feet. Height 28.75 in. Width 33.75 in. Depth Diago

Description - Tilt top table and two mahogany benches. Dimensions - Table - 30" x 30"

SEVEN ANTIQUE BRASS AND PEWTER DECORATIVE ARTSSeven (7) total pieces, including two (2) English tilt top tables / brass candle reflectors, French brass "Pigeon Lampe" oil lamp, floral pewter

AMERICAN CHIPPENDALE CARVED MAHOGANY TILT-TOP TEA TABLE, shaped two-board top with molded pie-crust edge over a turned bird cage above a fluted standard resting on spiraled urn, raised on a tripodal b

George II Mahogany Tilt Top Tea Tablecirca 1760, two board top with raised edge, oak block, urn turned standard, tripod base with snake feet, pad foot. 28.75 x 32.5 x 33 in. From the Collection of Che

Circa 1800. Having a handsomely figured octagonal two board top with pierced gallery above carved acanthus base emitting three acanthus carved legs terminating in pad feet. H30 1/4" W30 1/4" Note: Sol

Mid 18th century, Edenton, North Carolina or British. The piece having a very nicely figured two board top above box hinged to tilt and rotate housing pin to remove the top then continuing down to han

18th century, America or Britain. The piece having an elegant two board top with fine grain above turned wood base emitting three handsome cabriole legs with pad foot. Mahogany throughout. H27" W32" S

Classical period or First Period Empire tilt top table approx 27"H x 29.5" dia, has two board mahogany top.

18th century, America or Britain. The piece having an elegant two board top with fine grain above turned wood base emitting three handsome cabriole legs with pad foot. Mahogany throughout. H28" W30 5/

Chippendale mahogany tilt-top tea table, a round two board dish top in finely figured mahogany, on a turned and compressed ball standard ending in talon and ball feet. 29”H x 31.25” dia..

A two piece lot of eighteenth century English furniture. Including a George III mahogany pembroke table and a George III style mahogany tilt top breakfront table on tripod cabriole legs. Ht: 77" Width

19th Century, the rectangular two board solid mahogany tilt top with a reeded edge above a reeded quadruped base terminating in finely chased classical S-scroll brass caps. h. 29-1/2 w. 53 d. 46-1/2 i

Description: The top made from two pieces of mahogany, turned mahogany post on tripod pad feet. The supporting box is made from oak solids dovetailed together. Original hardware and screws. History: T

19th Century American Mahogany and Cherry Tilt Top Table, tripod base, turned standard, hexagonal top with banding. There are two small pieces missing to the edge as seen in photos. Height Overall 39

Philadelphia style. Having circular two-board top above tapering cylindrical shaft and three carved paw feet. Top refinished with signs of use. Apparently original tilt mechanism. 29" H. x 39"-40" Dia