Vintage Painted Half Hull Model on Mahogany Plank

Vintage Painted Half Hull Model on Mahogany Plank Height 6 in. Width 24 in.

Vintage Hand Painted Plank on Frame Half Hull Builder's Model of the Iron Barque Istlar, built in Blackwall in 1853, carved and painted hull mounted on painted backboard Length 44 in. Height 9.5 in.

Vintage Hand Painted Plank on Frame Half Hull Builders Model of the Iron Ship "Centaur", built in Portsmouth in 1865, carved and painted hull mounted on painted backboard. Length 44 in. Height 10 in.

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

Mahogany. Half hull. Painted. Backboard also mahogany. 6 3/8 x 23 3/4

Large vintage painted wood half-hull model LYNN OF LORN ARDMORE & CO. LIVERPOOL. 47 in long x 10 in high.

2 vintage painted wood half-hull models signed Ed Riley of Boothbay Maine: maroon and black PILOT SCHOONER HESPER 2009 and INTERNATIONAL ONE DESIGN, 21 x 7 inches.

2 vintage painted wood half-hull models signed Ed Riley of Boothbay Maine: FRIENDSHIP SLOOP, 17 x 6 inches, and MAINE LOBSTER BOAT 2009, 16.5 x 5.75 inches.

Vintage carved and painted wood half-hull model of the CLIPPER INVINCIBLE built 1851 by WH Webb. 45 x 11 x 3.5 in deep.

Large vintage carved and painted wood half-hull model of the CAMBRIAN built by Green and Lowden of London in 1854. 57 in long x 13.5 x 3.5 in deep.

Rigged Half-Hull Model of a Gaff Rigged Sloop, circa 1900, carved and painted hull with cardstock sails, cotton string rigging, set into a blue painted shadowbox with walnut molded frame, 19 1/2" x 20

(3) Half Hull Models of America's Cup Winners, incl: America - 1851, in two-tone laminated mahogany, mounted on a two tone wooden back panel with molded edge, brass plaque reads 'America - 1851- USA,

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

MOUNTED HALF HULL MODEL OF THE RACING YACHT "AMERICAN"Circa 1920Beautifully shaped with extreme overhang and deep keel. Tiger-grain mahogany surface above the waterline and painted green bel

MOUNTED BUILDER'S HALF HULL MODEL OF A SHOAL DRAFT SLOOPAmerica, Late 19th CenturyHull built up in eleven lifts of alternating yellow pine and mahogany. Mounted on a later white-painted backboard.Back

Collection of (4) Handmade Ship Models, including: Half hull model of a sailing yacht, blue and white painted hull, 25 1/4" x 7 1/2", surface wear, paint losses, holes and crack in base; Two masted sa

Vintage Yacht Half Hull Plaque on Mahogany Panel, painted in white yacht finish Height 16 in. Length 59 in.

Antique/Vintage Half Hull Sailboat Model Plaque, mixed media construction, metal sails, carved wooden hull, molded ocean and painted back drop mounted on board. 16.25 in. x 25 in.

wooden boat with white painted hull, two props, dingy, two electric motors, tops lift off to reveal the hull, 12 x 51 x 14 in., height with stand 14 in.

Carved half model of the American fishing schooner "Benjamin W Latham." With caulked deck, mahogany deck trim, and stubbed masts. Hull painted black over deep red. Mounted to a mahogany backboard. Ove

Painted Half Hull Model, America, 20th century. Mounted on a pine plaque with molded edge. Ht. 11 1/4, wd. 32 1/2 in. For further information on this lot please visit Bonhams.com For further informati

2 wood half-hull models of sailboats, smaller 23 x 6.5 in signed Don Renniston; larger unsigned is 30 x 7 inches.

Old carved wood and painted half hull model of a sailboat. 42 x 12 x 5 inches.

Painted half hull model of the yacht, "The Sheldrake". Lifts evident under paint. Designer: Winthrop L. Warner. Builder: Paul E. Luke. 1949. (Identified on engraved plaque). 12 x 36 3/4 inches (backbo