Bench Made Federal Style Tilt Top Candle Stand

Late 19th century. Having a two-board book-matched top with shaped edge above a nicely turned shaft which emits three legs. H25 1/4" W19 5/8"

Two Bench Made Federal Style Maple Standsearly 20th century, the first with a circular tilt-top, ring turned standard on dovetailed spider legs (28 x 15.5 in. diameter); the second with a rectangular

Federal style tilt-top candle stand, inlaid eagle and shield, urn shaped standard, on three legs, 20th C. 26 1/2" high

Mahogany Federal style tilt top candlestand with inlaid top, 25" x 16"

Circa 1880. Centennial example having an oval top with handsomely inlaid center with banded edge and all atop a turned wood base emitting three legs entering into a pad foot. H28" W27 1/2" Sold from t

With leather-inset top. Together with a George III Style piecrust tilt-top mahogany candlestand, marked Made in England underside. Wear, cleat loose and needs repairs, chips and losses. 24-3/4"h x 24"

A folding example with an octagonal top and a Federal style candlestand with a tilt top. Both 20th century. Dimensions:The candlestand is 23 1/2" x 15" and 28 1/2" tall, the folding table is 15" in di

AMERICAN BENCHMADE FEDERAL-STYLE CURLY MAPLE PAIR OF STAND TABLES, each with rectangular top over two drawers with brass knobs, raised on square tapered legs. Poplar secondary wood. Original surface.

Circa 1810. Having a circular one board atop an turned wood base emitting three Queen Anne style legs ending in a pad foot. H28 1/2" W20 1/4"

Vintage Bench Made 18th C. Style Tiger Maple Candlestand, shaped tiger maple top, turned standard on spider legs with spade feet. Height 29 in. Width 12.75 in. Length 18.5 in.

Federal Style Candlestand by Peter Eagle Inc, NY, mahogany with line and shell inlaid, tilt top, mid 20th C, 17"d, 22 1/2"h. CONDITION: Very good, a few minor scratches.

Pair Federal Style Stands, mahogany with courting and hunt scene, marquetry inlaid top over single drawer and bell flower inlaid tapered square legs, bench made, 19th / 20th C, 12" x 19 1/2" X 30 3/4"

Fine federal tilt top candle stand with inlaid top, heart design and shaped knees. School of Nathan Lombard. Nice old surface.

EARLY FEDERAL TILT TOP CANDLE STAND OVAL TIP SPIDER LEGS OLD CHERRY SURFACE

19th century American Federal tilt-top candle stand with turned pedestal, spider legs, and scalloped top, 28" H x 23 3/4" W x 17 1/2" L.

Cherry Federal tilt top candle stand, rectangular top with shaped corners, raised on tripod base with arched spider legs, American, early 19th c, 28-1/2" x 17" x 26-1/2"h

Cherry American Federal tilt top candle stand, oval top, hand wrought iron catch, over urn turned stand, over arched spider legs, top 21" x 14-1/2", 28-1/2"h, repaired break at top of one leg, circa 1

Federal Style Tilt Top Stand with Eagle Inlay, 20th century, no maker's mark, 25.25 x 26 x 18 inches.

First quarter 19th century, cherry. Octagonal top with inlaid foliate medallion. Turned column and three legs with scroll feet. Refinished with some surface scratches and edge loss, repair to block on

With cabriole legs and pad feet. Circa 1770-90, 16 3/8" wide, 25 1/4" long, 27 1/2" high CONDITION: No breaks. In good structural condition.

FEDERAL TILT-TOP CANDLESTANDNew England, Circa 1800In mahogany and cherry, with an octagonal top and three spider legs ending in spade feet.Height 29.25”. Top 23.75” x 18”.

MAHOGANY INLAID FEDERAL TILT TOP CANDLESTAND WITH SPIDER LEGS & CONCH SHELL INLAY (26" X 25" X 17 1/4")

FEDERAL TILT-TOP CANDLESTANDAmerica, First Quarter of the 19th CenturyIn mahogany. Lobed top. Turned pedestal supported by three reverse-arched molded legs.Height 27.75”. Top 27.5” x 18&#8

Mahogany Federal tilt top candlestand, scalloped top, 20" x 16", urn stem on arched spider leg base, 28 1/2" high, c 1810