Columbia #7 Aluminum Floating Reproducer w/Box

Oak cabinet has been stripped and refinished with a new decal. Cabinet in otherwise good condition. Has original aluminum Columbia # 7 reproducer with a bad stylus and diaphram. Also missing the cuein

This machine, with its open works, is in untouched, as found condition with original aluminum #7 reproducer with good stylus. Has original winding key. Has original governor straps and weights. Motor

Untouched, original machine has original Columbia #7 reproducer with good stylus. The upper works and motor have their original nickel plating which is in fair condition with some rust, pitting, and p

Untouched original machine in average condition, original Columbia aluminum #3 reproducer with bad stylus. Carriage, transport, cueing mechanism and mandrel all move freely, open works mechanism and b

Pathé "Coq" Cylinder Phonograph Model 1, c. 1905 France. No. 48819, for playing both standard and intersize cylinders, with floating reproducer, aluminum horn, combined case and storage box, work

This machine and its elaborate oak cabinet has original finish and decals in good original condition. Original Columbia aluminum No. 5 Reproducer with a good stylus. It has the original transport and

Machine with its key wound open works and mechanism is in overall good as found original condition. Has original aluminum No 7 Reproducer with a bad stylus. The carriage and mandrel move freely. Cuein

This machine in its handsome cabinet has been stripped, refinished and re-decaled. I has a high built glossy finish. Original #7 reproducer with a good stylus. Mandrill and carriage move freely. Carri

DESCRIPTION: Columbia Graphophone cylinder phonograph model BK in oak case with two horns. Spring driven mechanism with floating reproducer with lyre shaped frame labeled "Reproducer / Pat'd Oct 18, 1

Nice Columbia AU open works phonograph with 14" Horn, brass elbow, and reproducer. 7" Turn table. In working condition. Includes original crank. Base 7.5" L x 6.25" D. Total Length 20" L x 10" W.

Both the regular and 5" mandrels are present. Also has the winding key, aluminum horn and reproducer.

Good condition in working order with older reproduction aluminum horn. Rebuilt reproducer and stylus

Fancy key, reproducer, and Aluminum horn

Excellent single use condition, with no defects. Approx. 5 7/16". Glossy finish throughout. Box may show moderate shelf wear, and may include ink stains. Please enlarge pictures to clearly understand

Fancy key, reproducer, cover, 14" aluminum horn

This quality lightweight reel is made with graphite frame, 4 stainless steel ball barrings, aluminum spool, 5.7 OZ., 120yds./2lb., and way to change from left to right hand retrieve. Model #20600 with

Nice mixed lot of parts. Columbia Graphophone phonograph box with decal measuring 11" W x 6.75" D x 7" D. Original Columbia AJ upper support arm 11" center pin to reproducer center. Includes the ornat

Oak case Columbia BK with all original parts and finish. Includes lid and 14 aluminum horn with a repaired reproducer connection end. Extra nice original oak finish and decals. Bed plate pin stripping

1 Columbia cylinder record recorder in aluminum with good stylus in original box and 1 Columbia recorder in black - body only with diaphragm or cutter in a Columbia reproducer box.

Excellent cosmetic condition. Lightly used. Approximately 4 7/8 inches closed.

Columbia AZ in oak with 14" Aluminum horn. Bed plate and decals in good condition. Motor in good working condition. Reproducer working. The horn has dings and is solid. The finish is original and nice

2 7/8", Jersey rigged, featuring Donaly's large marked aluminum spinner, orange/red back and white belly with black accents, VG+/Ex- (wear, hook marks, old over-varnish). The box grades VG/VG+ (wear,

Motor winds up and runs. Drive belt needs an adjustment as it rides to the right on the top pulley. The reproducer is missing the stylist. Includes a 14" aluminum horn in rough condition. See photos.

Anaconda Copper Mining Company Plant. This was a spillover from casting aluminum bars. Presented to Governor Judy Martz at her tour of the facility in 2002. 15 7/8" tall, 12" long, 9" wide.