Federal Inlaid Mahogany Sewing Stand

Federal inlaid mahogany sewing stand with splayed legscirca 1800The top with inlaid fan motifs to corners, with scalloped aprons, the interior lined with silk.H: 26 1/2 in. W: 12 1/2 in. L: 17 1/2 in.

two inlaid drawers, canted sides with tapering reeded legs ending in peg feet h. 27 w. 19 d. 16 in.

American, 19th/20th C. 28"h x 20-1/2"w x 15-3/4"d

Federal mahogany and inlaid sewing stand with turned and reeded legs, circa 1810. Bag missing, top disconnected, as is. Height 29 in, Top 33 x 18 in.

circa 1800, compartment enclosed by flat hinged banded inlaid lid with canted corners, deep drawer beneath with faux-tambour sides and canted corners, pedestal base with urn form shaft and four excurv

Regency Inlaid Mahogany Sewing Stand , early 19th c., octagonal case with lift top, fitted interior, saber legs, X stretcher , h. 28 1/2 in., w. 22 in., d. 15 in

Federal mahogany sewing stand with shaped top over drawer over bag drawer on square tapered legs, circa 1800. ht. 29 1/2 in., top: 16" x 18 3/4"

Circa 1830, England. Having rectangular top with hinged leaves the top and leaves are banded in rosewood and brass nicely atop single drawer at upper case fitted with compartments for storage over yar

Federal mahogany sewing stand, 30 in. T, 20.5 in. W, 15 in. D.

Shaped lift top opening to a deep center yarn storage, flanked with 2 D shaped storage areas, with delicate square tapered legs with flared bottoms, 30”H x 24”W x 13”D

FRENCH REGENCY STYLE INLAID MAHOGANY SEWING STAND. HEIGHT 30 1/2"; TOP 16 1/2 X 22"

19th C Inlaid Mahogany Sewing Stand. 20 1/2" W 15 3/4" D 28" H

Attributed to Matthew Egerton (American, 18th/19th C.). Mahogany, brass. c. 1800-1810. Height: 30", Length: 19 1/2", Depth: 15 1/2". Hepplewhite inlaid mahogany sewing stand with concave front, one dr

Regency Satinwood-Inlaid Mahogany Sewing Stand. The octagonal top inlaid with an oval fan patera, lifting above a compartment and above a drawer, raised on slightly reverse-serpentine legs headed by p

Federal style mahogany sewing stand having drop leaves over three drawers on carved pedestal base over four claw feet. ht. 30in., top: 16" x 16"

second quarter-20th century; astragal form with single drawer, string inlay, and hinged lid on each side with stretcher shelf, 27 in. H., 25 in. W., 12 in. D.

Carved mahogany Federal sewing stand, the solid crotch mahogany top with D-ends, opening to reveal stacked fitted storage trays on each end, the center with a writing desk with storage compartments, t

Boston, cookie corner top with reeded edge, inlaid case with 2 dovetailed drawers retaining old brass case sides and back with line inlays to resemble drawers, proper left side contains the frame for

Bag slides to the side, having two drawers above. Secondary wood is mahogany, a characteristic of Thomas Seymour. Height 28.75 inches, width 21.25 inches, depth 17.25 inches.

Antique Mahogany Inlaid Sewing Stand. 26 1/2" W 14 1/2" D 29 1/4" H

Quality C 1920's Mahogany Inlaid Sewing Stand - hgt 28.5" w 29.5" d 14". Good overall condition for age. Found in Chicago ILL estate.

FEDERAL INLAID MAHOGANY SINGLE DRAWER STAND. HEIGHT 31 1/2"; TOP 14 1/2 X 19" (IMPERFECTIONS)

Inlaid and banded mahogany Martha Washington sewing stand, bench made, early 20th C

Federal Inlaid Mahogany Tilt-Top Candle Stand With a museum inventory number '1970.506'. 26 1/4 x 23 3/4 x 15 1/8 in.