ERNST PLANK HERCULES STEAM PLANT

1041. ERNST PLANK HERCULES STEAM PLANT | Desirable engine, small scale. | 12" h. | (Excellent to Pristine Condition) | $600 - $900

Vintage Ernst Plank toy stationary steam engine, Hercules. Manufactured by Ernst Plank Co of Nuremburg Germany in the early 20th century. Small metal plates read, E.P and Hercules. Pressed metal toy o

Ernst Plank steam engine with separate four-wheel transmission, both retaining original maker's plate and are mounted on wood bases, engine outfitted with a governor, 10'' h., 7'' w.

Rare circa 1910, German E, Plank live steam toy train locomotive. Measures about 8 1/2" long, mostly complete, needs some repair to cab, and top of one running light. Missing burner. A rare piece that

ERNST PLANK steam engine with ferris wheel, around 1900, drive model, mounted on a wooden board, board 39 x 14 cm, used, scratches on the paintwork, without burner German Description ERNST PLANK Dampf

steam powered flywheel with governor on wood base in original box with colorful paper label; housing retains makers' brass plaque engine on base 5.25" w. x 8.5" t. x 5" d.

Has good color, shows wear and paint loss throughout, dual chamber, top pipe has been resoldered, displays well, marked D.R.G.M. 193033, 14x9.75x10.75", rated 7.75

Ernst Plank. German - 1890 - 16" L x 12 1/4" T.

Includes European-style engine in green with burner on bottom, "EP" plate on backside of engine and with matching green four-wheel tender. There is one green passenger car labeled "I" and "II" with op

Ernst Plank Cosmos steam engine, in its original box, 13'' h., 4 1/2'' w.

Enamel painted tin, 11.5” long. It has a live steam mechanism with original burner and funnel, missing wick. It retains its stack ring and filler cab and would benefit from a cleaning, showing moder

Germany, early hand painted cab in green with brass finish boiler, tall stack, Vulkan label on side, together with hand painted four wheel tender.

1 Gauge. Circa 1890s. 35cm over-all l. Nice 2-2-0 loco with stop/start & reverse. It is missing its spring, but all else appears to be there. It has its matching tender and shows light to moderate pla

Plank Rapid Steam Plant with Wooden Box, in C6. Plank made the Rapid in six different sizes. The wooden box may not be original.

Circa 1910 Ernst Plank Vertical Steam Engine. All original with EP nameplate. Comes with Wilesco Machine Shop Accessory that has hammer, grinder, and saw. Steam Engine measures 11" Tall. Very Good-Exc

All original. Wheel has breaks. 14" Very Good

Very hard to find early 20th century Ernst Plank electric steam engine. All tin construction with 7" by 7" base. 11" tall to top of chimney. Has general wear, and some dings to boiler. Includes origin

4 Toy Steam Engines 1) Ernst Plank, horizontal steam engine with dynamo, boiler heavily modified, with additional manual feed pump, converted to gas heating, without chimney, dimensions of the basepla

276. ERNST PLANK PUPPET VALVE STEAM ENGINE | Circa 1895. | 13" h. x 12" l. | Stack and tin base holding flywheel is repainted, otherwise in All Original Condition. | $300 - $600

Ernst Plank painted tin ship swings steam toy accessory #1033/5, with four gondola cars with two painted composition riders in each, with painted wood lamps, base with makers tag, 9 1/4'' h., 10 1/4''

ERNST PLANK EXCELSIOR, standing steam engine, 35 cm, base casting, handpainted, brass boiler, burnished, with feed pump, burner, manometer, glass is cracked, water level glass, whistle, funnel, optica

Ernst Plank painted tin Ferris wheel steam toy accessory, complete with six gondolas, each with two painted composition dressed sailors, two flags, a stepped platform base, and a hand crank on flywhee

Germany, late 1800's, Ernt Plank brass finish steam powered locomotive, together with one green and one red passenger coach, each with interior bench seating, "EP" logo appears on front of boiler. Car

C. 1902 Scale Model of Steam Engine by Ernst Plank of Nuremberg. 4.5"W x 6"Deep x 13"H